I’m running Ubuntu 12.04 as host, with VirtualBox 4.2.22. This tutorial should cover guests including Windows XP, CentOS and Ubuntu.

1. Settings in VirtualBox

In the settings page, Check “Enable Serial Port”, set “Port Number” to “COM1”. This is the port number in the guest. If the guest is a Linux, COM1 is shown as /dev/ttyS0, and COM2 is shown as /dev/ttyS1.

Set “Port Mode” to “Host Pipe”, check “Create Pipe” and set “Port/File Path” to “/tmp/vbox”. Seems it utilizes a named pipe. These settings work even if the host does not have a physical serial device.

2. Install minicom

The second command setups minicom with an interactive menu. Select “Serial port setup”, and set “Serial Device” as “unix#/tmp/vbox”(without quotes). “Save setup as dfl” and “Exit from Minicom”.

3. Verity the serial device in guest

Now boot your Linux guest. Run the following command, and it should output something like:

The guest here is CentOS5, and the serial device is /dev/ttyS0.

4. Communication via serial device

Start minicom on your host:

Echo something from your guest and redirect to /dev/ttyS0. You host should get the message in minicom.

To read from the host, cat the device in guest so that you can do the input in minicom:

5. Kernel configuration

CentOS5 comes with grub1, /etc/grub.conf is modified directly to allow the boot information to also be sent to our serial device. The original boot entry looks like:

Change to add console= parameter:

That’s all for CentOS 5/6. There’s no need to modify /etc/inittab or /etc/securetty file as required in ArchLinux. These OS will do it for you.

Now, reboot your guest CentOS. The boot information should now displayed in your minicom. Finally, it will provide you with a login shell.

You can verify that there’s a new line added into /etc/inittab to enable getty(8) and execute a login shell:

And ttyS0 is also added into /etc/securetty.

6. Ubuntu guest settings

Ubuntu 12.04 come with grub2. We do not modify /boot/grub/grub.cfg, we modify /etc/default/grub instead, so that the serial console parameters will remain even after you update your kernel. Open it, modify the following line to:

And update grub:

One additional step for Ubuntu, is to enable getty(8) for serial console by your own. Ubuntu uses upstart init system, we need to create a file called /etc/init/ttyS0.conf containing the following:

Reboot you Ubuntu guest, and the serial device should work as it is with CentOS. More info, please refer to the official wiki.

7. Windows guest settings

The serial device shows as COM1 in Windows XP as previously set. With a simple echo and redirect, our host can receive the message.

8. Windows as host

Settings of VirtualBox under Windows is almost the same as that under Linux. But we set “Port/File Path” to “\\.\pipe\vbox”, instead of “/tmp/vbox”. After the configuration of kernel and getty(8), we can use PuTTY to connect. Simply set “Connection type” to “Serial”, and “Serial line” to “\\.\pipe\vbox”.